Directive 2014/35/EU · Annex IV ·Applies since 20 April 2016

Low Voltage Declaration of Conformity generator

Electrical equipment between 50 and 1000 V AC, or 75 and 1500 V DC, must be covered by an EU declaration of conformity before the CE marking goes on. Article 15 says it must have the model structure set out in Annex IV and be kept continuously updated. This free generator follows those seven points in the words the Directive uses. Two things are worth knowing before you sign: there is no notified body line, because conformity assessment here is internal production control and nobody else takes part; and point 5 leaves the legislation open, so one declaration can cover the EMC Directive as well.

5 FREE DOCUMENTS · RUNS IN YOUR BROWSER · NOTHING UPLOADED

Equipment

Manufacturer

Authorised representative (optional)

Conformity

Signature

Runs entirely in your browser — nothing you enter is uploaded or stored on a server while you generate.

The declaration attests to an assessment you have already made. The safety objectives in Annex I, the internal production control of Module A in Annex III, and the technical documentation are separate obligations and this tool does not check any of them. Point 5 leaves the Union harmonisation legislation open, so one declaration can cover the EMC Directive and others alongside this one. It does not tell you which act applies to your product. Informational only, not legal advice.
LIVE PREVIEW · EU DECLARATION OF CONFORMITY
Batch import from CSV

One document per row, for a whole catalogue. The file is read in your browser and never uploaded — the same as everything else on this page.

Column This form's field

Nothing here is checked against the act. This does not validate your entries, it does not decide which tool applies to your product, and a bad row produces a bad document. It does not check that the conformity assessment behind each declaration was carried out — that is the same responsibility the single form carries, two hundred times over.