Regulation (EU) 2016/426 · Annex V ·Applies since 21 April 2018

Gas appliances Declaration of Conformity generator

An appliance burning gaseous fuels, and a fitting intended to be incorporated into one, must each be covered by an EU declaration of conformity before the CE marking goes on. Annex V sets out its model structure. This free generator follows those nine points in the words the Regulation uses — nine, not eight, because point 8 carries the instruction that applies to fittings alone. What changed since: Regulation (EU) 2024/2748 has applied since 29 May 2026, adding emergency conformity-assessment procedures — it leaves Annex V untouched.

5 FREE DOCUMENTS · RUNS IN YOUR BROWSER · NOTHING UPLOADED

Equipment

Manufacturer

Authorised representative (optional)

Conformity

Notified body (optional)

Signature

Runs entirely in your browser — nothing you enter is uploaded or stored on a server while you generate.

The declaration attests to an assessment you have already made. The risk categories in Annex I, the essential health and safety requirements in Annex II, the conformity assessment procedures in Annexes V to VIII and the technical documentation are separate obligations and this tool does not check any of them. Point 5 leaves the Union harmonisation legislation open, so one declaration can cover other acts alongside this one. It does not tell you which act applies to your product. Informational only, not legal advice.
LIVE PREVIEW · EU DECLARATION OF CONFORMITY
Batch import from CSV

One document per row, for a whole catalogue. The file is read in your browser and never uploaded — the same as everything else on this page.

Column This form's field

Nothing here is checked against the act. This does not validate your entries, it does not decide which tool applies to your product, and a bad row produces a bad document. It does not check that the conformity assessment behind each declaration was carried out — that is the same responsibility the single form carries, two hundred times over.